Direct to Metal & Rust 2K Urethane Primer Kit
***ALL DTM primers are sold out until further notice***
Check back periodically to see when we get the raw materials back in stock to begin manufacturing this again. We apologize for any inconvenience this may have caused you.
DTM and DTR 2K HIGH BUILD 4:1 PRIMER
Uses Unique Rust Converter in primer! Apply over Rust!
HP-5311 Direct to Metal & Direct to Rust (DTM/DTR) Primer
HP-5311 Premium 2K DTM/DTR Primer-Surfacer with exceptionally high build and direct-to-metal properties. Very soft sanding, wet or dry after short dry times. HP-5311 Primer provides no shrinkage and the maximum in color holdout properties available.
HP-5311 BLACK is the same product as 5310, BUT with additive that allows you to paint OVER RUST! Great for restorations! This product is extremely THICK! Must reduce 15-20% to get thru primer gun
Mix Ratio:
HP-5311 Premium 2k DTM/DTR Primer 4parts
HH-3100 Activator 1part
Reduction of up to 15-20% with Tamco Universal Urethane reducers (HR-Series)
Pot Life. 1 hour at 70° F
Gun Setups:
Conventional
Siphon Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)
Gravity Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)
HVLP
Siphon Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)
Gravity Feed: 1.6 mm – 2.0 mm (0.063” – 0.079”)
Air Pressures
Conventional
Siphon Feed: 35-45 psi at the gun
Gravity Feed: 30-40 psi at the gun
HVLP 8-10 psi at the gun
Application:
-
Clean surface thoroughly using accepted body shop procedures.
-
Sand per accepted body shop procedures for substrate being used and final clean with solvent wipe.
-
Apply 2-3 medium coats of HP-5311 with 10-15 minutes flash between coats.
-
Do not apply more primer after 1 hour from completion.
Flash/Dry Times (Air Dry): Flash Between Coats: 10-15 minutes
Wet Sanding: 1 hour
Dry Sanding: 1 hour
Safety:
Technical Data & Physical Properties:
Color Black, Grey, White Sprayable Viscosity 26-33 sec. #2Z
Pot Life 1 hour Mix Ratio 4:1
Weight Solids 66% Volume Solids 51%
Weight per Gallon 11.7 lbs
Package VOC 3.5 lbs/gal RTS VOC 3.20 lbs/gal
TDS Sheets
TDS SHEET HERE
Tech Videos
Tech videos coming soon!!
Q&A
Q&A coming soon!
Procedures